Caterham 7 High Level LED Third Brake Light (Twin Pack)

(27 customer reviews)

RRP £216.00£221.00Price £163.99£169.50

SKU: Caterham 7 LED High Level Third Brake Light-Twin Pack Category:
Brand: Just Add Lightness


Our Caterham 7 High Level LED Third Brake Light Twin Pack enhances the look of your car whilst adding a valuable safety aspect to your Caterham 7. LED Third brake lights are proven to reduce the reaction time of a driver in a following vehicle and considerably reduce their stopping distance.

A difference in reaction time of just 0.2 seconds at 75 mph translates into 21 feet extra braking distance for the cars behind. This can literally be the difference between life and death.

This JAL kit is available with various roll bar clamps (32, 38 or 45mm) and 1.5m of wire to connect directly to your existing brake light circuit. This is a 5 minute upgrade and is easily one of the best safety modifications for your Caterham 7.

An optional Paint Pen is available to paint the P-Clip gloss black to match your roll bar.

Why add our Caterham 7 High Level LED Third Brake Light Twin Pack?

  • Safety – LEDs light up almost instantaneously reducing the stopping distance of cars behind
  • Can be used in pairs to further increase visibility (see video below)
  • Brighter and more aesthetically pleasing than other brake lights
  • Higher Efficiency – 90% of energy is turned into light
  • Long Lasting – LED’s last between 10,000 – 50,000 hours!
  • E Marked
  • No car body modifications required
  • 5 Minute install
  • 2 Year Warranty

What’s in the box?

  • 2 x Caterham 7 High Level LED Third Brake Light (Ready to fit)
  • 4 x Spade connectors

Paint Pen (optional)

  • Paint pen is ideal for painting the metal surface of the P-Clip to match your roll bar
  • 1 x gloss paint pen in black with 2-4mm round nib for easy application
  • Lacquer-like pigment ink dries quickly and is extremely resistant to light, for long-lasting results
  • Easy and clean application

How easy are they to fit?

Very easy! You do not need any vehicle or electrical knowledge to fit our LED lights.

Technical Specification

  • Each light has 7 x High Intensity LED’s
  • 90mm (Length) x 62mm (Height) x 62mm (Depth)
  • LED third brake light is built to IP67 specification (Protected from dust and capable of withstanding water immersion between 15 cm and 1 meter for 30 minutes).

Installation Video

Worldwide Shipping

Yes we Ship Worldwide. To obtain a shipping cost simply add items to your cart and enter your address at checkout. If your country is not listed at checkout please contact us.


If you have any questions regarding THE Caterham 7 High Level LED Third Brake Light then please use the ‘Product Enquiry’ tab

Quality Assured

As with any product there are cheap versions and high quality versions. LED’s are no different and there are many cheap LED’s available from China. We have rigorously tested dozens of products and we have found that many are sub-standard, less efficient and unreliable. With this in mind, we ensure that all Just Add Lightness products only use the highest grade, branded LED’s and components, to ensure the highest possible satisfaction for our customers.

If you’re looking for a lighting solution for your vehicle that combines efficiency and improved illumination, LED lights from Just Add Lightness are a great choice.

Why Change to LED?

27 reviews for Caterham 7 High Level LED Third Brake Light (Twin Pack)

Based on 27 reviews
5 star
4 star
3 star
2 star
1 star
Showing 2 of 27 reviews (4 star). See all 27 reviews
  1. Patrick Brown (verified owner)

    gbEngland, United Kingdom

    Very helpful and good service
    All the lights for the rear of the car work well and I’m pleased with the result

    When fitting the fog and reverse lights it was necessary to loosen the support for the fuel tank to get enough room for the wires and block to pass through.
    This isn’t clear in the video tutorial and added a couple of hours to the job also came at a high cost to the skin on my knuckles

    I purchased replacement stainless steel M12 screws to fix the rear lights on to the wings as the originals were badly corroded.
    Original used 2×1.5 inches and two at one inch, I replaced with the same however on one side needed a 2inch and retaining clip on the inner wing side to allow the screw to tighten in the old hole
    Cost of each screws £1.35 and a good upgrade to Stainless should be included or an option perhaps
    Whilst the LED part of the lights look very good the quality the plastic lenses and how they fit to their back box are just as Caterham originals average
    On the Fog and Reverse lights the LED light panel is offset and made fitting the lense awkward as it caught on one edge of the led panel
    Just my observations
    Overall very happy with the finished look

  2. Malcolm (verified owner)

    gbUnited Kingdom

    A good bit of kit! Further details on my Caterham blog site:

    Image #1 from Malcolm

Only logged in customers who have purchased this product may leave a review.

Additional information

Weight0.4 kg
Size of P-Clip Required?

32mm P-Clip + Black Gloss Paint Pen, 38mm P-Clip + Black Gloss Paint Pen, 45mm P-Clip + Black Gloss Paint Pen, 32mm P-Clip, 38mm P-Clip, 45mm P-Clip